- Other Electrical Equipment[5]
- Medical Cryogenic Equipments[1]
- Other Analysis Instruments[1]
- Clamp Meters[10]
- Current Meters[2]
- Multimeters[10]
- Other Electrical Instruments[10]
- Power Meters[10]
- Resistance Meters[10]
- Voltage Meters[7]
- Other Electronic Measuring Instruments[2]
- Signal Generators[2]
- Flow Meters[1]
- Level Measuring Instruments[3]
- Measuring & Analysing Instrument Processing Services[1]
- Laser Rangefinders[1]
- Other Measuring & Analysing Instruments[10]
- Other Physical Measuring Instruments[2]
- Speed Measuring Instruments[3]
- Width Measuring Instruments[1]
- Temperature Instruments[10]
- Testing Equipment[10]
- Used Measuring & Analysing Instruments[1]
YH7007 Loop Calibrator 250ohms Hart Equivalent to Fluke-707 Loop Calibrator
Loop Calibrator YH7007
1,Meet EU Standard
2,0.001mA resolution
3,24v loop power
4,OEM service provided
YH7007 Loop Calibrator 250ohms Hart Equivalent to Fluke-707 Loop Calibrator
YH7007 Loop Calibrator with 0.025% Accuracy And 250ohms Hart
Selectable slow ramp, fast ramp, and step ramp to provide smooth outputs for valve slewing and loop functional tests.
Loop Calibrator YH7007
Features
The fast, one-handed tool for loop checks. Just click to calibrate.
This feature-rich solution combines the best features push-button and knob-base loop calibrator and offers:
Large display and simple, quick-click interface for easy one-handed operation.
Simultaneous mA and % readout for quick, easy interpretation of readings.
mA accuracy of 0.025%, superior to other loop calibrators in this price range.
1 µA resolution for mA source, simulate and measure.
Push button 25% steps for fast, easy linearity checks.
0-100% “span check” for fast confirmation of zero and span.
Selectable slow ramp, fast ramp, and step ramp to provide smooth outputs for valve slewing and loop functional tests.
24 volt internal loop supply, so you can power and read a transmitter at the same time without carrying a DMM.
Measures V dc to 28 V.
Single 9V battery that is easily changed without braking calibration seal
0 - 20 mA or 4 - 20 mA default start up modes.
Innovative output adjustment dial with 1 µA and 100 resolution.
HART ™ mode connects 250 Ω resistor in series with 24 V loop for compatibility with HART communicators.
Specifications
Current Measurement | Range: | 0 to 24 mA |
Resolution: | 0.001 mA | |
Accuracy: | 0.025% Rdg + 2 LSD | |
Current Sourcing | Range: | 0 to 20 mA or 4 to 20 mA |
Accuracy: | 0.025% Rdg + 2 LSD | |
Drive Capability: | 1200 Ω; 950 Ω at 20 mA in HART mode | |
Current Simulation | Range: | 0 to 20 mA or 4 to 20 mA |
Accuracy: | 0.025% Rdg + 2 LSD | |
Ext. loop voltage requirement: | 12-30 V | |
Loop Power | While measuring mA, 24 V | |
Voltage measurement | Range: | 0 to 28 V DC |
Resolution: | 1 mV | |
Accuracy: | 0.025% Rdg + 2 LSD |
Safety Specifications
Maximum voltage 30V
Mechanical & General Specifications
Size 152 x 70 x 41 mm Weight 224 g (340 g including holster)
Warranty Two years
Display current and % of span Yes
Auto step, auto ramp Yes
Accesories included
Item | Desription | Quantity |
1 | a single 9v alkaline battery | 1 |
2 | Test lead | 1 |
3 | bending test plug wire clip | 1 |
4 | Aapter DV 9v 1A | 1 |
5 | Instruction sheet | 1 |
6 | certification | 1 |